10kV Wide Range Insulation Resistance Tester

The digital insulation resistance tester only uses a 5-inch large screen display, uses high-precision ADC to measure the measured insulation resistance, and integrates timing testing, absorption ratio, polarization index and other testing functions, and is widely used for insulation resistance test for transformer and other electrical equipment detection.

1. Output voltage 1000V, 2500V, 5000V,10000V four gears, applicable to multi-scenario electrical insulation resistance testing.

2. Timing test, automatic measurement of R15, R60, R600, automatic conversion of absorption ratio and polarization index.

3. Measurement range 1M Ω -1T Ω.

4. Combining analog bar pointers with digital displays to visually indicate the trend of data changes and accurate measurement results.

5. Strong anti-interference ability, suitable for measurement in strong electromagnetic interference environments.

6. The output voltage of the instrument is stable and has strong anti-interference ability.

7. Lithium battery powered, rechargeable and continuously standby for more than 10 hours.

1.In any case, safety precautions should be taken when using this insulation test meter..

2.Before use, it should be confirmed that the instruments and accessories are in good condition and free from damage, exposure, and broken wires before use.

3.Before use, read and understand the operating instructions in the manual thoroughly.

4.Ensure that the connecting plug of the wire is tightly inserted into the interface.

5.Do not use the instrument in a damp state.

6.Testing in flammable and hazardous areas is prohibited.

7.The test wire must be removed from the instrument before being pulled out. It is not allowed to touch the input socket by hand to avoid electric shock.

8.Please do not place or store the instrument for a long time in high temperature, humidity, places with condensation, or under direct sunlight.

9.The instrument and current jaws must be regularly maintained and kept clean, and cannot be wiped with corrosive agents or rough objects.

10.If this instrument is not used for a long time, please charge the battery to two compartments and save it.

11.The use, disassembly, calibration, and maintenance of this insulation resistor tester must be carried out by authorized and qualified personnel.

12.It is strictly prohibited to use sharp objects with high hardness to scratch the touch screen, in order to avoid damaging the screen.

13.It is strictly prohibited to hit or apply pressure to the touch screen.

• A black portable carrying bag
• Ane set of green dedicated test lead with alligator clip
• Ane set of red dedicated test lead with alligator clip
• Ane set of black dedicated test lead with alligator clip
• Three red insulated test probes (including hook-end and pointed types)
• One red heavy-duty alligator clip
• A black USB data cable
• A power adapter with power cord